PENGGUNAAN PASANGAN ELEKTRODA CuO- C PADA SEL FOTOVOLTAIK DENGAN ELEKTROLIT Na2SO4 DALAM GEL AGAR

Abstract: Photovoltaic cells using CuO-C electrode pair with Na2SO4 electrolyte in agar gel were fabricated with different concentration of agar (0.5 % - 2 %). The  oxide coating on the surface of Cu conducted with temperature and long electrode combustion variations. Research showed that the initial increase in agar concentration up to 1 %  improves the current of agar gel electrolyte while futher increase in concentration makes the current decrease and the voltage increases with increasing  agar concentration. The Oxide coating  showed optimum conditions of combustion at temperature 400oC and for 1 hour. Liquid and semi-solid photovoltaic cell produce the same current but the voltage of semi-solid photovoltaic was higher than liquid photovoltaic. The testing results of the cells showed an ideal I-V characteristic with output parameters: Voc of 0.032 V, Isc of 0.23 mA, with fill factor value of 0,353.
Key words: photovoltaic cell, electrolyte gel,  CuO  Semiconductor, fill factor
Penulis: Deby Oktaviana Putri , Admin Alif, dan Imelda
Kode Jurnal: jpkimiadd130213

Artikel Terkait :