WAKTU PENGERINGAN FINIR FACE/BACK DAN LONGCORE PADA TIGA JENIS KAYU DENGAN DUA TINGKAT KETEBALAN DI PT HENDRATNA PLYWOOD BANJARMASIN KALIMANTAN SELATAN
Abstract: The objective of
this research is to find out drying time of face/back veneer or long core
veneer of two different thicknesses ( A factor : 1.6 mm and 2.0 mm) of three wood
species (B factor). The result can be
recommended to the producer in order to increase quality of plywood produced.
Materials needed for this research are
veneers of Benuang (Octomeles sumatrana), Keruing (Dipterocarpus bornensis) and
Red Meranti (Shorea acuminata). Factorial Completely Randomized Design are
applied on data analysis of this research. Longest average drying time of 1.6
mm thickness veneer is Keruing long
core veneer (A1B2), 705 seconds (rolling speed is 544 – 693 rpm), and the shortest is Red Meranti veneer (A1B3), 422 seconds
(rolling speed is 710 – 859 rpm). For 2.0 mm long core veneer, the longest
drying time is Benuang veneer (A2B1), 750 seconds (rolling speed is 250 – 450
rpm) and the sortest is Red Meranti veneer (A2B3), 436 seconds (rolling speed
475 – 675 rpm).
Key word: Drying time, veneer
Penulis: Gusti A. R. Thamrin, Isnawati
Kode Jurnal: jpkehutanandd080030
