Pengembangan Pedal Efek Gitar Elektrik Menggunakan Arduino
Abstract: The guitar has
become common entertainment show at the moment. Devices Arduino controller
board is present as a central processing for a variety of processing
requirements, one of which is processing the sound. So the goal is achieved
from this study was to test the Arduino as a controller device that is used in
the effect processing. This study uses the waterfall method of development.
Steps being taken begins with identifying needs and then proceed with the
process of designing both the hardware and software. Then proceed with the
testing design. In the testing phase used 3 kinds of testing, those are
hardware testing, test using the software, and testing using respondents. The
test results showed that the Arduino can be used as a controller of guitar
sound processing with two inputs and outputs. It was also found that the true
bypass pedal interface can change the path of the guitar input to be routed
directly to the output. Other interfaces available on the system is also
functioning as it should and can set values that affect the processing of
voice. Based on the test results with the respondents, producing a sound that
is quite good, has a full feature, and quite easy to operate.
Penulis: Martin Clinton Tosima
Manullang, R. Rizal Isnanto, Eko Didik Widianto
Kode Jurnal: jptkomputerdd150510
