Studi Kekuatan Sambungan Plat Pada Spot Welding Ditinjau dari Kekuatan Tarik dan Geser
Abstract: This event will be
based on research with the desires of the author about what exactly is the
appropriate Spot Welding was simply and commonly used in the car industry for
the manufacture of karoseri. The purpose of this research is to know the time
of good press to perform welding on a particular plate of black and Galvanized
plates with a thickness of 1.2 mm Methods of research conducted the first test
of the composition, process of making test samples, conduct further testing of
welding, pull and slide on each individual plate types, data processing, data
analysis, make form conclusions, and making reports. After doing some research
and obtained results that is, press time is good at 3.5 seconds on each plate
with the current 26 Amper. From the above data can be drawn the conclusion that
the press at the time of welding point is very influential to the value of the
tensile strength and shearing strength. Because at the time of the electrode to
the weld material emphasis will generate heat, thus forming clots, heat process
that happens will affect the result of the welding connection.
Penulis: Nofriadi Handra
Kode Jurnal: jptmesindd130552
