PENGARUH POLYVINYL ACETATE (PVAC) TERHADAP KUAT TEKAN MATERIAL NANOKOMPOSIT DARI TANDAN KELAPA SAWIT
Abstrak: The aims is to
determine the effect of filler Mg(OH)2 against pressing pressure nanocomposite
material bunches of palm oil that has been made. The method used in this study
is a simple method of mixing and hot press method. Presses temperatures used in
this study was 100 ° C, the time press was 15 minutes and pressing pressure was
50 MPa. To determine the feasibility of the nanocomposite material has been
made by characterization with the
pressing test. From the pressing test results obtained to the highest pressing
presure when the composition ratio of
waste oil palm empty fruit bunches (TTKS), PVAc, Nonosilika is 13:2 : 0,75 (gr)
with the pressing presure as big as 55
MPa, while the composition ratio of the composite without giving PVAc obtained
pressing presure as big as 22.5 MPa. This research method is very useful
to produce a material that is strong and light nanocomposite in a short time
interval.
Penulis: Ida Sriyanti, Leni
Marlina
Kode Jurnal: jpfisikadd140114
