JUMLAH FINIR FACE DAN CORE PADA 3 (TIGA) VARIASI DIAMETER LOG DI PT. SURYA SATRYA TIMUR CORPORATION BANJARMASIN
Abstract: Two steps of rotary
cutting produced face and core veneer.
Fist step is cutting log cylindric and second is cutting log become wide
ang long veneer, and log core. One of plywood industry problems is lack of log
supply, So Industry have to process log
become veneer efficienly. One way can be
done is calculating how much face and core veneer produced bay log 60,65 dan 70
cm in diameter. This result data can be
used to calculate how much log needed in a certain time (month or year), So
efficiency of logs can be increased. Based on data collected, the average
veneer produced by 60 cm log is 248,49 meters or 195 face veneer sheets (2285 m
x 1265 m) with 0,60 mm thickness; 65 cm
log in diameter produced 311.454 m or 245 face veneer sheets and 70 cm
log ini diameter 377,388 meters or 297 face veneer sheets.Other treadment, log
with 60 cm in diameter produce 137,253 meters of veneer or 59 core veneer sheers (2280 + 1260 mm) and 1,4 mm in
thickness 65 cm log produced 168,81 meters or 73 core veneer sheets and 70 cm
log produced 194,28 meters of veneer or 84 core veneer sheets. Every 5 cm
increasing in diameter of log will increaced veneer produced 52 to 77 face
veneer sheets and 11 to 14 core veneer sheets.
Keywords: face veneer,core
veneer,plywood
Penulis: Muhammad Faisal
Mahdie
Kode Jurnal: jpkehutanandd090046
