Abstrac: This research aims to
study the effect of torsion angle on the stresses and strains on the material
in this case steel and
brass. Data collection
was performed with
the addition of
a torsional angle
to 1o in materials,
material length between
65 mm to
85 mm. Results
obtained on different
materials with the same
length showed that
the stress on
the steel material
is greater than
brass (424.415 kgf/mm2 vs. 190.987 kgf/mm2) and the same
material (brass) with different length showed that the length of 85 mm smaller
voltage longer than 65 mm (190.987 kgf/mm2 vs. 341.89 kgf/mm2).
Keywords: torsion, tension and
strain
Penulis: R. Magga
Kode Jurnal: jpmatematikadd100008
Artikel Terkait :
