PENGARUH JENIS KAYU DAN JUMLAH LAPISAN TERHADAP SIFAT VENIR LAMINA
ABSTRACT: This study aims to
determine the effect of wood species and the number of layers of veneer against
laminated veneer properties. Wood species consist of sengon, pine, and mixed
pine sengon. Laminated veener made by a number of layers consist of 4, 6, and 8
layers. The difference of a number of layers was to identify quality of
laminated veneer. The adhesive used is urea formaldehyde (UF) liquid. The
results showed that the average moisture content of 10.76%, density of 0.54
g/cm3, delamination 5.8%, MOE 124.108 kg/cm2, and MOR 450.74 kg/cm2. The
moisture content and delamination made all meet the Indonesian National
Standard. Statistically, wood species were a significant effect on moisture
content, density, MOE, and MOR, while various of layers were a significant
effect on moisture content, density, delamination, MOE, and MOR. The number of
layer’s laminated veneer made higher of water content, density, delamination,
and MOR.
Penulis: Mochamad Isa
Iskandar, Achmad Supriadi
Kode Jurnal: jppertaniandd170465
