SIMULASI KOMPUTER PADA OPTIMASI DESAIN HYBRID PLATING DALAM PROSES BONE HEALING
ABSTRACT: Hybrid plating
method that combine locking screw and non-locking screw usually used for
healing on bone fracture. This methodusedin order to get the
smallestdeflectionandpreventpullout. The research purposed to obtain the
optimal parameter design locking screw, such as position of locking screw,
thickness and width plates by using Taguchi method which obtained level and
variations factor. The material used in this study for screw and the plate were
stainless steel SS 316 L. The load model used axial load of 1000 N. The number
of hole plates were 8, which 4 holes in each section. In one section consist of
locking screw and non locking screw Quasi experimental model applied ANSYS
Workbench 14.5 finite element software. Results showed the optimum design was 3
locking scews in the left position, the thickness 4 mm and a width of plate 16
mm. The optimum design produce 0,039507 mm of average deflection and it can be
denoted that failure and pull out was not occurred.
Penulis: Mohamad Irkham
Mamungkas, Moch. Agus Choiron, Wahyono Suprapto
Kode Jurnal: jptmesindd140202
