PENGARUH WAKTU TEKAN DAN HASIL GUMPALAN TERHADAP KEKUATAN GESER PADA LAS TITIK
Abstract: Spot welding is
actually used for body of car manufacture on automobile industry. The purpose
of this research was to know the good time of pressure and the current of
welding, especially for 1,5 mm sheet metal
welding. The methods that were used in this study were, first of all,
making of experiment of the strenght of the welding result, processing dat,
analyzing data and making conclusion and report. After doing the research and
getting the result, the good time of pressure and current used on 1,5 mm sheet
metal was 10, 20 and 30 seconds and 70 Amp. Is was proven that after the shear
tested for the pressure time 10 second and current 70 Amp. The result of treatment
gotten was 488,658 N/mm2, and for the pressure time 30 seconds and Amp, the
shear strenght gotten was 510,593 N/mm2. The
data analysis the
writer concluded that
time of pressure
and current were
very insfluenntial on the
result of the
strenght of welding
by using spot
welding machine. It was because
of the electrode pressure time of
welding on the material would cause heat that making nugget. The heat
processing will influence the result of welding extension.
Penulis: Nofriady Handra
Kode Jurnal: jptmesindd140224
