Studi Karakteristik Pembubutan Keras Baja Perkakas Aisi 01 Menggunakan Pahat Keramik
Abstract: The better
performance of hard machining comparing to grinding operation for machining
process of manufacturing product id the background of research reported in this
paper. This research is focused on producing the mathematical formulation for
tool life (Tc) and volume of material removal (Qc) in which both formulations
are derived base on the extended taylor formula. Moreover both performances are
used to determine the optimum cutting condition using ginting and nouari (2006)
method. The AISI 01 steel which was hardened up t 60 HRC is the work piece
inthis research where as the ceramic made of
+ tic is use as cutting tool. The data collection was done by
factorial And the data analyzed by multi
linear regression method. The result of research shows that optimum cutting
condition at 95 m/min cutting speed, 0.09 m/rev feeding, and 0.25 mm depth of
cut. Furthermore from the curved which correlating three parameters V-Tc-MRR
plotted base on ginting and nouari (2006) method shows that high speed machining
can not be recomended on hard machining under dry environment . From all aspect
resulted from this research it can be concluded that dry machining can be
carried out on hard turning of AISI 01 steel using ceramic cutting tool made + tic.
Penulis: Yuliarman, A. Ginting
Kode Jurnal: jptmesindd070018
