Optimasi Proses Sand Blasting Terhadap Laju Korosi Hasil Pengecatan Baja Aisi 430
Abstract: Corrosion is
naturally occuring phenomenon
and will be
exist by itself
in the metal.
The metal will be damaged by
an electrochemical reaction
with its environment
and can not eliminated but can do a variety of
prevention efforts, such as by using a barrier layer that is in the process
of painting. In the
process, the quality
of painting is
paint adhesion influenced
by surface roughness. The
preparation can be
done by themethod
of spraying a
sand blasting abrasive material
in the form
of sand forced into
the surface of
the material. sand
blasting process could make
the paint more
durable and more
resistant to corrosion.
The parameter used in
this study were
sand blasting spraying
pressure i.e 4;4,5;5;5,5
bar, sand blasting spraying angle
600; 750; 900. The
results showed that
the greater the
pressure and angle
of sand blasting, the corrosion rate is lower Average corrosion rate of
the lowest occured at 5 bar spraying pressure and 900 spraying angle were
7.2157-E5; 7.1157-E5; 6.95-E5 mpy
Penulis: Putu Hadi Setyarini,
Erwin Sulistyo
Kode Jurnal: jptmesindd110274
