Analisa Penggunaan Proses Bubut Keras Sebagai Pengganti Proses Gerinda Selinder
Abstract: Turning hardened
tool steel using ceramic cutting tool can make advantages over traditional
process use grinder. It is can increased productivity and reduced power
consumption and can use without coolant. The aims of these studies are to
define optimum cutting condition using response surface method (RSM). This
study use ceramic tool Al2O3 + TiC (CC650) with specimen AISI O1 heat treated
to hardness of 60 HRC and use Maximat V13 turn for machining. Measurement of
roughness use Portable Surface Roughness Tester SJ-201 P/M. Result these study
are: The smallest roughness is 0 53 μm, at 84 m/min cutting speed (V), 0,045
Rot./min feeding (f), and 0.35 mm dept of cut (a).
Penulis: Yuliarman, Asmed, Zulhendri,
Nota Effiandi
Kode Jurnal: jptmesindd110152
