PERANCANGAN POROS TRANSMISI DENGAN DAYA 100 HP
ABSTRACT: The aim of this work
is to design a shaft for transmitting power of 100 hp. There are two gears on
the shaft, and two bearings as supports at the shaft.
Based on design result, diameter of critical points on the shaft have
been acquired as follows; D1=1,80 in, D2=3,40 in, D3=3,74 in, D4=5,00 in,
D5=4,40 in, and D6=3,15 in. Finally, a technical drawing of the designed shaft
can be made using Autocad software.
Penulis: Freddy Mananoma,
Agung Sutrisno, Stenly Tangkuman
Kode Jurnal: jptmesindd170088