Perancangan Alat Bantu Pengendalian Kualitas Shuttle Cock Secara Atribut Dan Variabel Dengan Pendekatan Antropometri Pada Industri Kecil Di Kelurahan Serengan
Abstract: Serengan is the
center of shuttle cocks small scale industry in Surakarta. The makers use
simple tools to process the shuttle cocks. Besides, there are no tools to
control which are used to inspect the shuttle cocks in the making process or as
the final products. This condition makes the customers get no guarantee for the
shuttle cocks they buy, especially the shape of the shuttle cocks. In this
research, the quality variables measured were the length of the feather, the
height and diameter of the cork. So that, the tools to control the quality of
shuttle cocks are needed to standardize the quality of the shuttle cocks
produced. In this research, the setting up of shuttle cock’s quality control
tools atributely and variably were done by using anthropometry approach. The
product samples of the shuttle cock were taken from the makers especially T3
brand. The sample were used to know how far the process deviation by using x
and R diagrams and the analysis of process ability was done to find out the
process distribution to product specification. The shuttle cock’s quality
control tools were designed by using anthropometry approach. The anthropometry
data were collected from the measurement of the students of Industrial
Engineering of Sebelas Maret University at The Laboratorium of Work Design and
Ergonomy Analysis of Industrial Engineering Sebelas Maret University. The data
processing result shows that the length of feather, the height and the diameter
of the cork, especially T3 brand, are still out of the limit of specifications.
Then, the tools to control the quality of the shuttle cocks based on their
feather’s length and the cork’s height and diameter was designed. The tools
were designed based on anthropometry approach by measuring the quality
atributely and variably wich can determine whether a product can pass the
specification or not based on variables measured.
Keywords: Qulity Control;
Shuttle Cock; Feather’s Length; Cork’s Height; Cork’s Diametre; Anthropometry
Penulis: Eko Liquiddanu,
Taufiq Rochman, Akung Purwito Aji
Kode Jurnal: jptindustridd070034
