RANCANG BANGUN ALAT PENGGULUNG KAWAT EMAIL UNTUK KUMPARAN MOTOR MENGGUNAKAN MIKROKONTROLLER ATMEGA328 SEBAGAI UNIT PENGENDALI
Abstract: Application of
automation in the production process at this point is very helpful, easy and
can be used to cover the human limitations in increasing the productivity
better. Application of automation is very suitable for secondary industry,
because, automation is inexpensive and can be realized only with a computer
device can even be stored on a chip that stores various kinds of commands as a
controller equipment you want to control, of course, with the right program.
One application can be applied to the coil wire roller by utilizing the
microcontroller ATmega328 as the unit will store the control command to specify
the amount of the roll, set the pace rolling, and stop rolling. With the keypad
as the input number of reels, set the speed of the rolling process by using pot
to change the value of the PWM, and a limit switch as a unit calculating the
number of rolls, after the suppression amount is equal to the value of the limit
switch input, the process will stop. Once embodied in a tangible form, this
tool can work well, the input values 25 rolls dihasilkann much as 25 rolls with
PWM 150, but a mechanical fault suppression limit switch occurs at high speed,
the difference between the input value and the results can be within 4 pieces
of excess rolls the PWM value of 255
Penulis: Valdi Rizki Yandri,
Desmiwarman Desmiwarman
Kode Jurnal: jptlisetrodd160188
